Osculati Gelcoat Filler White 200g

£12.95

Osculati Gelcoat Filler is a high-quality, two-component polyester filler designed for use on gelcoat surfaces. This filler is ideal for repairing and filling small cracks, scratches, and chips on boats, yachts, and other marine vessels.

To ensure the best results, make sure the surfaces are completely dry and perfectly clean. Sand the surface with P80 or P150 sandpaper before applying the filler.

Draw the amount needed from the pack with clean tools, adding 1 to 3 grams of hardener per 100 grams of the product. Mix the two components well and apply the putty on the surface to be treated. Bear in mind that the product can be sanded after about sixty minutes. The hardening time can be altered depending on room temperature; temperatures above 25°C shorten it and lower temperatures stretch it.

Do not put any unused product back in the pack to avoid deterioration of the entire content. Close the pack after use to prevent contact with air that can harden the product. After drying completely, sand the part with P80, P240, P400, and 1000 sandpaper. Then polish with Levante Polish Abrasive.

Note: Always wear gloves and protective eyewear when working with this product. Avoid breathing in the dust from sanding or grinding the filler. Use in a well-ventilated area.

UOM: PZ
Height: 9 cm
Weight: 0,30 kg
Width: 8 cm
Cubage: 478 cm³
Length: 8 cm

574 in stock

SKU: 65.520.06 Categories: , , , Tag:
This website uses cookies and asks your personal data to enhance your browsing experience. We are committed to protecting your privacy and ensuring your data is handled in compliance with the General Data Protection Regulation (GDPR).